Aluminum jacket with polysurlyn moisture barrier is good for mechanical abuse and for weatherizing exterior pipes. The inside of the aluminum is coated with a PSMB-POLYSURLYN MOISTURE BARRIER retarder that provides an excellent resistance to moisture and has excellent abrasion protection during installation. The Aluminum Jacketing is cut and rolled to fit each size of pipe insulation correctly.

Haomei Aluminum Jacketing with polysurlyn has a bare outer surface and comes standard with a 3-mil thick polyfilm moisture barrier heat-laminated to the interior surface to help prevent corrosion of the jacketing and the underlying metal pipe, vessel, or equipment.

We are one of the well-known manufacturers and suppliers of Poly Surlyn Aluminum Coil, The offered Poly Surlyn are cylindrical rolls of aluminium laminated with poly surlyn. Our supplied Poly Surlyn are very large in length, to facilitate the cutting based on client specified dimensions. Our supplied Poly Surlyn are widely used in power plants, petro chemical refinery and cement industries.

Grade: 1006, 1100, 3003, 3105, 5005
Temper: O, H12, H14, H16, H24, etc.
Common use: 3003 H14 H16, 1100 H14 H16, 5005 H14
Type: Coil roll
Application: Industrial insulation jacketing, cover, insulation protective jacketing
Thickness: 0.3-1.5mm
Width: 914mm, 1000mm, 1219mm
Length: 20, 25,30, 60, 90m per roll or as per clients
Surface Treatment: Plain, Flat, mill finish, Embossed
Moisture barrier: polysurlyn
Certificate: ISO9001, GB/T3880, ASTM B209
Packaging: packed in carton or coil in wooden pallet
Delivery time: 25-45 days
Minimum order quantity: 2 tons

Specification of Aluminum with Polysurlyn Moisture Barrier

Alloy		Thickness(inch)	Thickness(mm)	Width(mm)	Length(m)	Suggested Application
1100, 1060, 3003, 3105, 5005	H14, H16	0.012	0.3	914, 1000, 1219	20, 25,30, 60, 90, coil	OD below 36"(914mm) insulated pipe lines.
		0.016	0.4	914, 1000, 1219	20, 25,30, 60, 90, coil	OD below 36"(914mm) insulated pipe lines.
		0.020	0.5	914, 1000, 1219	20, 25,30, 60, 90, coil	OD below 36"(914mm) insulated pipe lines.
		0.024	0.6	914, 1000, 1219	20, 25,30, 60, 90, coil	OD 36"-8′ (914mm-2.43m) insulated pipe lines&equipment.
		0.032	0.8	914, 1000, 1219	20, 25,30, 60, 90, coil	special applications where extra thickness and protection is required, such as fabricated tank head covers and other special fabrications.
		0.040	1.0	914, 1000, 1219	20, 25,30, 60, 90, coil	special applications where heavy mechanical is required.
		0.050	1.2	914, 1000, 1219	20, 25,30, 60, 90, coil	flat ducts or precipitators. Also recommended for areas subject to high wind conditions.

Remarks: Other sizes available upon request.

Chemical Composition of aluminum coil with polysurlyn

Alloy	Si	Fe	Cu	Mn	Zn	Mg	Ti	Cr	Other Elements		Al
									Each	Total
1060	0.25	0.35	0.05	0.03	0.05	0.03	0.03	-	0.03		99.6min
1100	Si+Fe=0.95		0.05-0.20	0.05	0.10	-	-	-	0.05	0.15	99.0min
3003	0.6	0.7	0.05-0.20	1.0-1.50	0.10	-	-	-	0.05	0.15	reminder
3105	0.6	0.7	0.30	0.30-0.80	0.40	0.20-0.80	0.10	0.20	0.05	0.15	reminder
5005	0.3	0.7	0.20	0.20	0.25	0.50-1.10	-	-	0.05	0.15	reminder

Why Poly Surlyn:

Simple, low cost, and effective resistance to metal jacket and pipe corrosion.
Provides a barrier to crevice or pitting corrosion on the inner jacket surface in cold and hot pipe/tank applications. Provides a barrier to galvanic corrosion of jacket or pipe in hot applications.

Polysurlyn is manufactured from 3 layers of film:
1 mil high-density polyethylene, 1 mil Surlyn, and 1 mil low-density polyethylene, with each layer carefully selected to yieldoptimum performance. This multilayer film is laminated to the interior side of STIPL's aluminium and stainless steel jacketing using precise pressure and heat. Use of 3 mil thick three layer Polysurlyn Moisture Barrier, (PSMB) film avoids the pinholes prevent in standard 1 mil single layer Polykraft.

Polysurlyn advantages:
Minimal water absorption compared to kraft paper
Will not deteriorate, discolor or shred when exposed to water
Provides abrasion resistance during intallation
Long term durability and resistance to a wide range of environmental contaminants
Metal jacketing with PSMB has an ASTM E8 fame/smoke performance
Aluminium jacketing with PSMB complies with ASTM C1729, Class A

Smooth Aluminum Jacketing

1.Shed rain water the best
2. Show damage such as physical abuse.
3. Show the dirt due to its smoothness. 
4. It is highly reflective of sunlight

Stucco embossed Aluminum Jacketing

1, Increase its strength and ductility
2, Extend its lifetime
3, Better bribability, durability
4, Effectively reduce rowing
5, Not cause strong light reflecting
6, Have a good vision effect

Polysurlyn Moisture Barrier is an engineered coextruded film of polyethylene and Surlyn polymers with a total film thickness of 3 mils .Polysurlyn Moisture Barrier is heat laminated in the factory to the interior surface of all types of metal jacketing for mechanical insulation to help prevent pitting, crevice, and galvanic decomposition of the interior apparent of the metal jacketing and the underlying insulated pipe, tank, or equipment. This corrosion can occur when water enters the installed insulation system through joints or damage in the metal jacketing. PSMB consists of Five film layers each carefully selected to yield optimum performance. The inner layer is predominantly LDPE for excellent adhesiveness after heat lamination. The middle layer is Surlyn for strength. The top layer is predominantly HDPE for superior hardiness and abrasion blocking. The use of high-density layer of polyethylene, one layer of Surlyn resin, and one layer of low-density polyethylene fundamental guarantees that there are no pinholes through the entire film because any holes in a single layer will not align with holes in the other layers.

Features of polysurlyn laminated aluminum

1.Customized packaging solutions for extended shelf life
2.Excellent barrier against moisture, oxygen & odour
3.Excellent mechanical properties even at low thickness
4.High burst strength and puncture resistant.

Application of Aluminum Jacketing with Polykraft moisture barrier

Aluminum Jacketing is recommended for use in all of the following insulation system applications:
• Standard outdoor use on all pipe, vertical tank insulation systems up to 8 ft outer diameter, and all horizontal tanks.
• Indoor insulation system applications up to 8 ft outer diameter where increased damage resistance is desired.

Strength of Haomei Al.

Packaging and Delivery of Haomei Al.

Aluminum products of Haomei Al. meet the export standard. Plastic film and brown paper can be covered at customers’ need. What’s more, wooden case or wooden pallet is adopted to protect products from damage during the delivery. There are two kinds of packaging, which is eye to wall or eye to sky. Customers can choose either of them for their convenience. Generally speaking, there are 2 tons in one package, and loading 18-22 tons in 1×20′ container, and 20-24 tons in 1×40′ container.