Stucco Embossed Aluminum Jacketing /Cladding is made out of embossed aluminum metal roll.  The inside of the aluminum pipe jacket is coated with a poly moisture retarder that provides an excellent resistance to moisture and has excellent abrasion protection during installation.

The Stucco Embossed Aluminum Jacketing is cut and rolled to fit each size of pipe insulation correctly. Use the chart to determine the size of the jacketing needed for the pipe insulation that you are trying to cover. Aluminum jacketing is good for mechanical abuse and for weathrizing exterior pipes. Aluminum jacketing can be installed with either 1/2" drill screws or banding and seals (fab straps).

The stucco embossed surface texture hides small imperfections and scratches caused by physical damage during or after installation. This finish also reduces reflectivity while still looking very professional. Lastly, the use of stucco embossed finish provides a small increase to the rigidity and strength of the aluminum jacketing.

Grade: 1006, 1100, 3003, 3105, 5005
Temper: O, H12, H14, H16, H24, etc.
Common use: 3003 H14 H16, 1100 H14 H16, 5005 H14
Type: Coil roll
Application: Industrial insulation jacketing, cover, insulation protective jacketing
Thickness: 0.3-1.5mm
Width: 914mm, 1000mm, 1219mm
Length: 20, 25,30, 60, 90m per roll or as per clients
Surface Treatment: Stucco Embossed
Moisture barrier: polysurlyn, craft paper
Certificate: ISO9001, GB/T3880, ASTM B209
Packaging: packed in carton or coil in wooden pallet
Delivery time: 25-45 days
Minimum order quantity: 2 tons

SIZE CHART of aluminum jacketing stucco

Alloy		Thickness(inch)	Thickness(mm)	Width(mm)	Length(m)	Suggested Application
1100, 1060, 3003, 3105, 5005	H14, H16	0.012	0.3	914, 1000, 1219	20, 25,30, 60, 90, coil	OD below 36"(914mm) insulated pipe lines.
		0.016	0.4	914, 1000, 1219	20, 25,30, 60, 90, coil	OD below 36"(914mm) insulated pipe lines.
		0.020	0.5	914, 1000, 1219	20, 25,30, 60, 90, coil	OD below 36"(914mm) insulated pipe lines.
		0.024	0.6	914, 1000, 1219	20, 25,30, 60, 90, coil	OD 36"-8′ (914mm-2.43m) insulated pipe lines&equipment.
		0.032	0.8	914, 1000, 1219	20, 25,30, 60, 90, coil	special applications where extra thickness and protection is required, such as fabricated tank head covers and other special fabrications.
		0.040	1.0	914, 1000, 1219	20, 25,30, 60, 90, coil	special applications where heavy mechanical is required.
		0.050	1.2	914, 1000, 1219	20, 25,30, 60, 90, coil	flat ducts or precipitators. Also recommended for areas subject to high wind conditions.

Remarks: Other sizes available upon request.

Chemical Composition of stucco aluminium pipe cladding

Alloy	Si	Fe	Cu	Mn	Zn	Mg	Ti	Cr	Other Elements		Al
									Each	Total
1060	0.25	0.35	0.05	0.03	0.05	0.03	0.03	-	0.03		99.6min
1100	Si+Fe=0.95		0.05-0.20	0.05	0.10	-	-	-	0.05	0.15	99.0min
3003	0.6	0.7	0.05-0.20	1.0-1.50	0.10	-	-	-	0.05	0.15	reminder
3105	0.6	0.7	0.30	0.30-0.80	0.40	0.20-0.80	0.10	0.20	0.05	0.15	reminder
5005	0.3	0.7	0.20	0.20	0.25	0.50-1.10	-	-	0.05	0.15	reminder

Classification of stucco embossed aluminium cladding

Stucco embossed Aluminum Jacketing
1, Increase its strength and ductility.
2, Extend its lifetime.
3, Better bribability, durability.
4, Effectively reduce rowing.
5, Not cause strong light reflecting.
6, Have a good vision effect.

Embossed Aluminum jacketing laminated with polysurlyn

Poly surlyn : Dupont surlyn, 3 mil thickness(76um)
Color: Bule
Aluminum sheet thickness : 0.3-1.5mm
Package: 20-30m/roll in one carton or big coil
Advantage: water-proof, prevent oxidation

Embossed Aluminum jacketing laminated with kraftpaper

Kraft-paper: 166g/m2
Color: khaki
Aluminum sheet thickness: 0.3-1.5mm
Package: 20-30m/roll in one carton or big coil
Advantage: water-proof, prevent oxidation

Features of aluminum jacket stucco embossed

1.Customized packaging solutions for extended shelf life
2.Excellent barrier against moisture, oxygen & odour
3.Excellent mechanical properties even at low thickness
4.High burst strength and puncture resistant.

Application of stucco embossed aluminum jacket

Aluminum jacketing is recommended for insulated piping, tanks and vessels less than 8 feet in diameter. Aluminum Jacketing is recommended for use in all of the following insulation system applications:
• Standard outdoor use on all pipe, vertical tank insulation systems up to 8 ft outer diameter, and all horizontal tanks.
• Indoor insulation system applications up to 8 ft outer diameter where increased damage resistance is desired.

Strength of Haomei Al.

Packaging and Delivery of Haomei Al.

Aluminum products of Haomei Al. meet the export standard. Plastic film and brown paper can be covered at customers’ need. What’s more, wooden case or wooden pallet is adopted to protect products from damage during the delivery. There are two kinds of packaging, which is eye to wall or eye to sky. Customers can choose either of them for their convenience. Generally speaking, there are 2 tons in one package, and loading 18-22 tons in 1×20′ container, and 20-24 tons in 1×40′ container.