Aluminium cladding for pipe insulation is typically manufactured using alloys AA 3003, 3105, 1050, 1060, 1070, 5052, 5005 which are widely used for the purpose of insulation jacketing. Most common used alloy for insulation are 1060 and 3003 H14 H16. 3003 is better in anti-rust performance than 1060.
 
Aluminum cladding for pipe insulation is available in Smooth, Stucco Embossed, with or without moisture barrier (craft paper and poly surlyn).

Grade: 1006, 1100, 3003, 3105, 5005
Temper: O, H12, H14, H16, H24, etc.
Common use: 3003 H14 H16, 1100 H14 H16, 5005 H14
Type: Coil roll
Application: Industrial insulation jacketing, cover, insulation protective jacketing
Thickness: 0.3-1.5mm
Width: 914mm, 1000mm, 1219mm
Length: 20, 25,30, 60, 90m per roll or as per clients
Surface Treatment: Plain, Flat, mill finish, Embossed
Moisture barrier: polysurlyn, craft paper
Certificate: ISO9001, GB/T3880, ASTM B209
Packaging: packed in carton or coil in wooden pallet
Delivery time: 25-45 days
Minimum order quantity: 2 tons

Specification of aluminium cladding for insulation

Alloy		Thickness(inch)	Thickness(mm)	Width(mm)	Length(m)	Suggested Application
1100, 1060, 3003, 3105, 5005	H14, H16	0.012	0.3	914, 1000, 1219	20, 25,30, 60, 90, coil	OD below 36"(914mm) insulated pipe lines.
		0.016	0.4	914, 1000, 1219	20, 25,30, 60, 90, coil	OD below 36"(914mm) insulated pipe lines.
		0.020	0.5	914, 1000, 1219	20, 25,30, 60, 90, coil	OD below 36"(914mm) insulated pipe lines.
		0.024	0.6	914, 1000, 1219	20, 25,30, 60, 90, coil	OD 36"-8′ (914mm-2.43m) insulated pipe lines&equipment.
		0.032	0.8	914, 1000, 1219	20, 25,30, 60, 90, coil	special applications where extra thickness and protection is required, such as fabricated tank head covers and other special fabrications.
		0.040	1.0	914, 1000, 1219	20, 25,30, 60, 90, coil	special applications where heavy mechanical is required.
		0.050	1.2	914, 1000, 1219	20, 25,30, 60, 90, coil	flat ducts or precipitators. Also recommended for areas subject to high wind conditions.

Remarks: Other sizes available upon request.

Chemical Composition of aluminium pipe cladding

Alloy	Si	Fe	Cu	Mn	Zn	Mg	Ti	Cr	Other Elements		Al
									Each	Total
1060	0.25	0.35	0.05	0.03	0.05	0.03	0.03	-	0.03		99.6min
1100	Si+Fe=0.95		0.05-0.20	0.05	0.10	-	-	-	0.05	0.15	99.0min
3003	0.6	0.7	0.05-0.20	1.0-1.50	0.10	-	-	-	0.05	0.15	reminder
3105	0.6	0.7	0.30	0.30-0.80	0.40	0.20-0.80	0.10	0.20	0.05	0.15	reminder
5005	0.3	0.7	0.20	0.20	0.25	0.50-1.10	-	-	0.05	0.15	reminder

Classification of insulation aluminium cladding

Smooth Aluminum Jacketing

1.Shed rain water the best
2. Show damage such as physical abuse.
3. Show the dirt due to its smoothness. 
4. It is highly reflective of sunlight

Stucco embossed Aluminum Jacketing

1, Increase its strength and ductility
2, Extend its lifetime
3, Better bribability, durability
4, Effectively reduce rowing
5, Not cause strong light reflecting
6, Have a good vision effect


Aluminum Jacketing with Moisture barrier

Haomei Aluminum Jacketing products can be supplied with a 40# kraft (1 1/2 mil polyethylene) or a 3 mil polysurlyn moisture retarder which is heat and pressure bonded to the interior surface. A moisture retarder helps prevent galvanic corrosion caused by contact of dissimilar metals in the presence of moisture or chemical corrosion caused by installing sheets over damp insulation materials.

Benefit:  Moisture barrier prevents corrosion and protect inner insulation materials

Aluminum jacketing laminated with polysurlyn

Poly surlyn : Dupont surlyn, 3 mil thickness(76um)
Color: Bule
Aluminum sheet thickness : 0.3-1.0mm
Package: 20-30m/roll in one carton or big coil
Advantage: water-proof, prevent oxidation

Aluminum jacketing laminated with kraftpaper

Kraft-paper: 166g/m2
Color: khaki
Aluminum sheet thickness: 0.3-1.0mm
Package: 20-30m/roll in one carton or big coil
Advantage: water-proof, prevent oxidation

Features of aluminum pipe cladding

1.Customized packaging solutions for extended shelf life
2.Excellent barrier against moisture, oxygen & odour
3.Excellent mechanical properties even at low thickness
4.High burst strength and puncture resistant.

Application of aluminum cladding

Aluminum Jacketing is recommended for use in all of the following insulation system applications:
• Standard outdoor use on all pipe, vertical tank insulation systems up to 8 ft outer diameter, and all horizontal tanks.
• Indoor insulation system applications up to 8 ft outer diameter where increased damage resistance is desired.

Strength of Haomei Al.

Packaging and Delivery of Haomei Al.

Aluminum products of Haomei Al. meet the export standard. Plastic film and brown paper can be covered at customers’ need. What’s more, wooden case or wooden pallet is adopted to protect products from damage during the delivery. There are two kinds of packaging, which is eye to wall or eye to sky. Customers can choose either of them for their convenience. Generally speaking, there are 2 tons in one package, and loading 18-22 tons in 1×20′ container, and 20-24 tons in 1×40′ container.